HK series flat forging machine

Introduction of Flat forging machine

Flat forging machine is also called horizontal forging machine. As a branch of mechanical press, flat forging machine mainly produces die forgings by local upsetting. In addition to local gathering steps, the equipment can also realize punching, bending, flanging, trimming and cutting. Due to its high productivity, it is suitable for mass production. Therefore, it is widely used in automobile, tractor, bearing and aviation industry.

Working principle of flat forging machine

The flat forging machine is an end forging machine for upsetting bars and tubes in the horizontal direction. The flat forging machine has 3 kinds of motion mechanisms. The punch (punch) reciprocates in the horizontal direction. Generally, 4 to 6 die cavities can be set up, which are used for the forming mechanism of the upsetting process such as accumulation, heading, punching, and flanging, and are also the main force-applying mechanism. Movable die: It can be opened and closed upwards, downwards or horizontally to clamp long bars and withstand the upsetting force at the end. Cutting mechanism: used to separate the forging from the long bar. Flat forging machines are all driven by a crank slider mechanism. Due to the large workpiece to be processed, the upsetting force and clamping force are large, the machine needs to have sufficient rigidity to ensure the accuracy of the flat forging.

Features of flat forging machine

1.The die is separable, and has two parting surfaces. It can forge forgings (double-flange bushings, etc.) with concave stops and holes in two directions. The shape of the forging is closer to the shape of the part, so it can be Die forging forgings with no slope and complex shapes.
2.During the forging process, the billet is placed horizontally, and its length is not limited by the working space of the equipment. Long rod forgings that cannot be forged by vertical forging equipment can be forged, and long rods can also be continuously forged one by one.
3.The main slider and the clamping slider are respectively driven by two sets of mechanisms to drive the upsetting punch and the clamping die respectively. Move in the direction perpendicular to each other, and realize clamping, upsetting, retraction, loosening and other actions according to a certain program.
4.The clamping mechanism and transmission mechanism of the driving die are equipped with overload protection devices to prevent overload damage during the clamping process.
5.The rigidity of the bed and the crank-link mechanism is relatively high.
6.Horizontal split die flat forging machine is easy to realize mechanized production.
7.The upsetting slider has a longer guide device, which can withstand large eccentric loads and is suitable for multi-cavity die forging.
8. Poor versatility, not suitable for work such as pulling out lengths.

Tailor-made solutions

Our JINZHEN specialists develop tailor-made installations for your hydraulic power units as well as other components and solutions.

Increase your productivity

Significantly increase your performance and save money.

Conservation of resources

Whether it's oil, water or energy - our solutions sustainably conserve your resources.

Energy efficiency

We reduce your power losses – increase your energy efficiency now.

About HK series flat forging machine you may also want to know these

How can i get the after-service?

We will send you the spare parts by free if the problems caused by us. If it is the men-made problems,we also send the spare parts,but you should pay.

Do you have inspection procedures for press machine ?

100% self-inspection before packing.

Can I have a visit to your factory before the order?

Sure,welcome to visit our factory. Our factory address: NO.26 Changjiang Road ,Anyang City Henan Province,China

Accessories are damaged, can provide new accessories

If under warranty, we can provide you with original parts

Contact JINZHEN to Start Your Business

Have a look at how some of our clients perceive our Equipment and services:

Name/Company:

*Email:

Whatsapp/Phone:

*Messages: